Latest Acoustic Guitar Reviews and News

2019 Martin Models Review: 16 Series – All of Them!




Martin Got it Right with the New and Improved 16 Series

Rosewoods and Ovangkol = Impressive Tone

I am preparing a review of each 16 Series Martin, but I am also preparing to leave for the annual Martinfest. So, until I can return to writing guitar reviews next week, here is my review of the new 16 Series as a whole:

“Four Stars! The best-sounding 16s in a quarter of a century.” – One Man’s Guitar

C. F. Martin & Co. debuted a new and improved 16 Series at the Summer NAMM show in Nashville, Tennessee, featuring acoustic-electric models based around rosewood guitars with spruce tops, beginning with four new or improved models: the D-16E, GPC-16E, 000-16E, and 00-16E.

They also released two ovangkol acoustic-electric models constructed with ovangkol tops, the D-16E Burst and OMC-16E Burst.

While I enjoy the new looks of these guitars, what I really care about is tone. So, I avoided the noisy trade show floor, and went instead to the Martin Guitar factory in Nazareth, PA, where I could play and hear these impressive new offerings in the secluded, acoustically-treated confines of Martin’s sound testing room.

Let there be no doubts about it, the 16 Series instruments are by design a collection of acoustic-electric guitars meant for the professional concert stage. None of the new models has a stamp on the neck block with an “E” in it, because there are no more 16s made without a fully adjustable electronic pickup system installed at the factory as a standard feature. That being Fishman’s Matrix VT Enhance system, which has an undersaddle pickup with tone and volume controls working in combination with a bridge plate sensor blended in by a third control. All of them discretely placed inside the guitar.

Martin Guitar 16 Series strip Summer NAMM

Acoustic Guitars First and Foremost

But they also sound very good when played unplugged as acoustic guitars. And this, despite a Dreadnought and a Grand Performance size instrument that are made with their depth reduced to that of the 000 and 00 models.

This improved tone is due in part to the robot-created Simple Dovetail neck joint that Martin introduced a few years back to replace Mortise and Tendon neck joint that was first used on Style 16 Martins in 1995. While today’s 16s do not offer the exact same fullness of tone or wide ranging dynamics as models from the Standard Series made with the full-size hand-fitted dovetail neck joint set into a solid mahogany neck block, it is an inestimable improvement over M & T joint and the extra bracing required to support it.

When used in combination with a solid ebony bridge, today’s 16 Series instruments are deservedly in a different league to the earlier generations that just seemed full of cost cutter specs like fretboards and bridges made of various non-wood materials. Of the new models, the D-16E is closest to its immediate rosewood predecessor, the D-16RGT, with the side depth being perhaps the most notable difference. But I feel it sounds surprisingly good, with tone better than I remember hearing from a 16 in a long time. But then, I was even more impressed with the GPC-16E.

The primary reason for this reduction in depth is to curtail the problems of electronically amplifying an exceptionally resonant acoustic guitar like a Martin. I was skeptical of this new dreadnought with its shallower sides. But it still sound like a dreadnought, with much more growl and soul in the heart of its voice than I thought possible before I picked it up and gave it a strum.

The trade off is that it does not have the big bulbous bass note at the very bottom, which dreadnought lovers find so satisfying. But frankly, there are a lot of full-size dreadnoughts on the market that do not have the bass in the bottom E string as this new Martin. It has been curtailed some, but it is still there.

The GPC-16E likewise has the side depth of a 00, 000, and OM. And that has proved a revelation. Where the D model has a dominant A string, not unlike an OM in this respect, the GPC-16E retains the dominant bottom E string, while achieving a voice more spread out and spacious compared to the typical Grand Performance or other small jumbo guitars on the market.

Martin may have stumbled on that long-sought super-OM kind of sound, with the balance and dynamics of a good OM but with just a little more bass that frees that low E string from the gravity of wolfish A string. And like its D-size sibling, the rosewood back and sides, forward-shifted scalloped bracing, and a solid ebony bridge give it a luxuriously complex tonal pallet, with leaping sympathetics and an effortless body resonance that other leading guitarmakers have been reinventing the wheel to try and achieve, with limited success.

A bonus feature of the shallow sides is that they make these two large-top guitars more comfortable to play for not-so-large guitarists.

Looks Like a Martin, Smells Like a Martin, Sounds Like a Martin

For about a decade, Martin invested a certain percentage of their design efforts in creating products with an image, feel, and sound that might compete for consumers who have become enamored of contemporary brands and guitar styles made elsewhere. It seems lately that Martin has returned to focusing on what they have always done best – full-bodied acoustic tone, naturally resonant and complex, generated from a guitar with classic acoustic guitar looks. And even with the various body shapes they borrowed from other brands in recent years, they have stopped trying to make their version of trendy, hipster guitars, and used the shapes to create true Martins with the kind of tone that can’t be had anywhere else, and the kind of aesthetic that is Martin in origin, and even, dare I say it, traditional.

The new 2019 16s are made with Standard Series features like Antique White biding on the top and back, Style 28 mother-of-pearl fretboard dots to go along with the vintage-esque open-back tuning machines, and Old Style script logo, while retaining the fanciest of the various Style 16 top trim used over the years, the herringbone rosette and double line top purfling that are a simplified variation of inlays seen on Style 21 guitars from the pre-war era.

So now, the gloss top makes a D-16 look just like a Standard Series Martin from the front, while the body has a satin finish. Satin finish may not be a Standard Series spec, but there are many world-class guitars made that way, with George Lowden’s instruments as a prime example. What is a Standard Series feature is the full complement of scalloped bracing, with the larger bodies having their bracing pattern forward-shifted in the pre-war fashion, to maximize bass response and get the most out of that rosewood resonance.

Summer NAMM Martin 00-16E Granadillo 72
Martin D-16E glam 72

To be entirely accurate, only the D-16E and GPC-16E have a back and sides made from East Indian rosewood. The 000-16E and 00-16E are made from granadillo, which is not technically a rosewood. It is a species of Platymiscium that Classical guitarmakers sometimes called Mexican rosewood, because it can resemble cocobolo rosewood in terms of density and Guatemalan rosewood in terms of a thick, full-bodied tone that works very well indeed for beefing up the bottom end of small-bodied guitars. It certainly sounds more like rosewood than it doesn’t.

But granadillo is also notably heavier than Indian rosewood. And that is probably why Martin chose not to use it for the Dreadnought and Grand Performance models. They would have seemed abnormally weighty in the hand, and the undertone of the lower-mids might have been too dense and murky for bodies already putting out a lot of bass frequencies.

The 000-16E has its own satisfying body resonance and the sort of bottom end beef that a short-scale Martin 000 should have, Its slightly smaller sibling, the 00 has less muscle in its guts but has the prominent fundamentals of a great Blues machine and the added comfort of the smallest top width of the new 16 Series. And both are made with the 24.9” short scale High Performance Neck, which I find exceptionally comfortable, as Modified Low Oval profiles go.

And all of these new models mentioned are wonderfully expressive and have very pretty trebles when played within the zone of optimum resonance. And while they can start to sound thin up top when under serious attack, they do not have the shrill harshness that often plagued 16 Series guitars from previous eras.

Stylish Style 16

From the outsides, the spruce-topped models have a traditional appearance that ties directly into the pricier Standard Series instruments, while the ovangkol models have the Mahogany Burst of the 15 Series Streetmaster models, upgraded with faux tortoise bindings. It can be generally said that the ovangkol models offer a step up from the 15 Series instruments, while the new spruce-topped 16s have taken a step or two toward the Standard Series, in more than just looks.

While the new models look quite a bit different than the 16s they are replacing, they have the same internal construction. Those now-retired 16s had been “reimagined” with silver-colored binding and orange and black top trim that was borrowed from design schemes in the automotive industry. Initially dubbed the “Americana Series,” they featured back and side woods sourced within the USA. There was an OMC made from cherry, a GPC with 000 depth made from koa, and a D and DC made with 000 depth from sycamore.

Those late models can still be found for sale in shops, and they are well liked by those who have purchased them. But when the 16 Series instruments had a acquired a reputation for tone that was more lightweight or thin compared to the full-bodied heavy hitters in the Standard Series, using tonewoods that do not have the rich bass response and tonal complexity of rosewood and tropical American mahogany wasn’t doing the silver-bound Martins any favors, in terms of broad appeal and resulting sales. And neither were their unusual looks.

Herringbone trim was long gone from the Martin catalog when Style 16 first appeared in 1961. At the time it was meant to offer mahogany guitars with the same construction as Style 18 instruments, but with simpler appointments and a lower price tag, in much the same way Style 21 allowed for more-affordable rosewood models than Style 28. Style 21 vanished in the 1960s and Style 16 not long after.

When Style 16 reappeared in the 1980s, it was a catchall designation for trade show specials that were not for wider sale, but allowed Martin to try out various outside-the-box designs. Eventually, the first D-16s were offered for general sale in mahogany, ash, walnut, and koa. In the early ‘90s the D-16 offered mahogany guitars with scalloped, forward-shifted bracing as well as tortoise binding and pickguards, when the D-18 and 000-18 still had black trim and non-scalloped, non-forward bracing.

In 1995, the “16 Series” was launched as a collection of “new technology” guitars, losing the traditional hand-fitted dovetail neck joint and solid mahogany blocks, and adopting an ever-changing list of specs, neck shapes, woods, non-woods, and all sorts of on-board electronics. And this spirit of innovation at affordable prices continues in the new D-16E Burst and OMC-16E Burst, made with ovangkol back, sides, and top.

D16E-02_GLAM_Details_0003 sh 72 16 series D16E-02_GLAM_Details_0004 72 16 Series OMC16E_GLAM_Details_0003 72 16 series

I have always loved the looks of guitars made with a hardwood top. And these new 16 Burst models are about as good as it gets. They will draw a lot of attention in guitar shops and their unique tone will stand up to that first attraction.

Ovangkol is an African wood that sounds something along the lines of Claro walnut, to my ear. Warmth and overtones, but never in extreme amounts. One of those “in between rosewood and mahogany” tonewoods, I was pleasantly surprised at how well it works as top wood. Mahogany, koa, and walnut have all been used as tops on Martins over the years. Each produces its own mellow presence without the vibrancy or volume of spruce. But they sound sweeter the longer they age even if they  take a while to break in.

Well, these two ovangkol Martins do not have same sort of muffled tone typical of hardwood tops when they are brand new. So while it has that soft lamplight glow from the wound strings similar to an all-mahogany guitar, there is more openness and focused clarity as well, particularly where the unwound treble strings are concerned. And yet they seem to also have the clear and straightforward sustain that made mahogany and koa tops a favorite for players of steel guitar.

The 16 Series as always been a place where Martin Guitar could introduce new looks and new specs and see how well they do with consumers. And the ovangkol Burst models are the latest release to try those trade winds and see if they can sink or float. Time will tell. But I think they are pretty swell.

I have never encountered a guitar before with an ovangkol top, so I look forward to seeing how they will age and play-in. Right now they are quieter and easier to overdrive than their spruce-topped counterparts. That should improve with time, especially since they get the same traditional Martin bracing, rather than the simplified A-frame X bracing used on the 15 Series.

When played in a relaxed manner, they both sound absolutely lovely, with the OMC-16E Burst alive with sprightly overtones. It is when a guitarist digs in and plays hard that they sort of wimp out, overdrive and get spanky, especially the treble strings. But that is an issue for all Martins made without the traditional dovetail neck joint. The hardwood top just makes it more obvious.

Most people do not play as hard as I do, so what I might hear as deficiencies between the 16 Series Martins and the Standard Series models may go entirely unnoticed by many guitarists. Certainly some players will prefer the tone of the 16s to other Martins. And it  is basically a moot point once they plug in and go electric.

What is important is that the acoustic tone of these new 16s is 100% Martin and truly satisfying. This is not a matter of having to go without to save some money.

I have no problem recommending them to anyone looking for a good deal on a good guitar in that price range. There have been many times over the past 25 years when I couldn’t say that about a Style 16 instrument. But the 2019 Martin 16 Series is the real deal, and at those prices, a steal.

And that’s one man’s word on…

Martin 16 Series for 2019

Here is the GPC-16E…

 

Written reviews begin next week, when I get back from Martinfest, in the mean time, here are the video reviews.

Martin D-16E Review

Martin GPC-16E Review

Martin 000-16E Review

Martin 00-16E Review

Martin D-16E Burst Review

Martin OMC-16E Burst Review

Video Review: Martin OMC-16E Burst (2019)

OMC-16E Brust specifications include: Orchestra Model with Cutaway body shape; solid ovangkol top with Mahogany Burst under gloss finish; solid ovangkol back and sides with satin finish; scalloped 1/4″ braces; long-scale High Performance Neck with Modified Low Oval profile and High Performance taper (1-3/4″ at the nut, 2-18″ at the 12th fret) on the solid ebony fingerboard; 2-5/32″ string spacing at the solid ebony bridge; faux tortoise shell and pickguard; Fishman Matrix VT Enhance electronics with onboard volume and tone control, and Enhance blender for undersaddle pickup and bridge plate sensor. 

The classic Orchestra Model experience with an ovangkol top that adds warmth like a walnut top but with the vibrant trebles of spruce.

2019 Martin Models: The New 16 Series in Review – ALL of them

Video Review: Martin D-16E Burst (2019)

D-16E Burst Specifications include: Dreadnought body shape; solid ovangkol top with Mahogany Burst under gloss finish; solid ovangkol back and sides with satin finish; scalloped 1/4″ braces; long-scale High Performance Neck with Modified Low Oval profile and High Performance taper (1-3/4″ at the nut, 2-18″ at the 12th fret) on the solid ebony fingerboard; 2-5/32″ string spacing at the solid ebony bridge; faux tortoise shell and pickguard; Fishman Matrix VT Enhance electronics with onboard volume and tone control, and Enhance blender for undersaddle pickup and bridge plate sensor. 

The classic Dreadnought looks, but a comfortable shallower depth. The ovangkol top that adds warmth like a walnut top but with the vibrant trebles of spruce.

2019 Martin Models: The New 16 Series in Review – ALL of them

Video Review: Martin 00-16E (2019)

Specifications include: Grand Concert body size; solid Sitka spruce top with gloss finish; solid East Indian  back and sides with satin finish; scalloped 1/4″ braces; Short-scale High Performance Neck with Modified Low Oval profile and High Performance taper (1-3/4″ at the nut, 2-18″ at the 12th fret) on the solid ebony fingerboard; 2-5/32″ string spacing at the solid ebony bridge; Antique White body binding; faux tortoise shell pickguard; Fishman Matrix VT Enhance electronics with onboard volume and tone control, and Enhance blender for undersaddle pickup and bridge plate sensor. 

The 14-fret 00 body size is very comfortable and portable while still putting out the sound of a full-size acoustic guitar, especially when plugged in.

2019 Martin Models: The New 16 Series in Review – ALL of them

Video Review: Martin 000-16E (2019)

000-16E pecifications include: Auditorium body size; solid Sitka spruce top with gloss finish; solid East Indian  back and sides with satin finish; scalloped 1/4″ braces; Short-scale High Performance Neck with Modified Low Oval profile and High Performance taper (1-3/4″ at the nut, 2-18″ at the 12th fret) on the solid ebony fingerboard; 2-5/32″ string spacing at the solid ebony bridge; Antique White body binding; faux tortoise shell pickguard; Fishman Matrix VT Enhance electronics with onboard volume and tone control, and Enhance blender for undersaddle pickup and bridge plate sensor. 

The short-scale neck makes for a comfortable and fun playing experience with plenty of power to handle big strumming and fingerstyle blues.

2019 Martin Models: The New 16 Series in Review – ALL of them




Video Review: Martin GPC-16E (2019)

Specifications include: Grand Performance with Cutaway body shape with 000 side depth; solid Sitka spruce top with gloss finish; solid East Indian  back and sides with satin finish; scalloped 1/4″ braces; long-scale High Performance Neck with Modified Low Oval profile and High Performance taper (1-3/4″ at the nut, 2-18″ at the 12th fret) on the solid ebony fingerboard; 2-5/32″ string spacing at the solid ebony bridge; Antique White body binding; faux tortoise shell pickguard; Fishman Matrix VT Enhance electronics with onboard volume and tone control, and Enhance blender for undersaddle pickup and bridge plate sensor. 

The shallow body greatly increases resistance to feedback when plugged in, while creating an acoustic voice more like an OM, only louder and with a little more power from the lowest bass string.

Video Review: Martin D-16E (2019)

D-16E specifications include: Dreadnought body shape with 000 side depth; solid Sitka spruce top with gloss finish; solid East Indian  back and sides with satin finish; scalloped 1/4″ braces; long-scale High Performance Neck with Modified Low Oval profile and High Performance taper (1-3/4″ at the nut, 2-18″ at the 12th fret) on the solid ebony fingerboard; 2-5/32″ string spacing at the solid ebony bridge; Antique White body binding; faux tortoise shell pickguard; Fishman Matrix VT Enhance electronics with onboard volume and tone control, and Enhance blender for undersaddle pickup and bridge plate sensor. 

The shallow body greatly increases resistance to feedback when plugged-in, while maintaining the look of a classic Martin Dreadnought.

2019 Martin Models: The New 16 Series in Review – ALL of them

Summer NAMM Martins 2019

Nashville Gets a Guitar Shop’s Worth of Summer NAMM Martins

A New 16 Series Makeover, American Chopper Limited Edition Among the Summer Crop

Martin Guitar 16 Series strip Summer NAMM

Sweet Sixteen

Following the successful redesign of Martin’s Standard Series instruments, the more-affordable 16 Series has received seven new acoustic-electric models with similar updated specifications and Fishman Matrix VT Enhance electronics, a duel-source system with discrete volume and tone controls inside the sound hole to adjust the signal from the undersaddle pickup, and a third discrete control to blend in the signal from Fishman’s Enhance bridge plate sensor.

The new core models are the long-scale D-16E, GPC-16E, (both with 000 side depth) and the short-scale 000-16E, and 00-16E. Each has a solid Sitka spruce top with a high gloss finish, fronting a satin finished back and sides of either solid East Indian Rosewood, in the case of the large bodies, or solid Granadillo in the case of the 000 and 00.

While these new models retain the bold herringbone sound hole rosette and top trim of the previous 16RGT models, they differ in several significant ways, including having the scalloped bracing on the dreadnought and grand performance models forward-shifted, as well as having no binding on the necks. The Dreadnought is also made with the side depth of a 000.

These new 16s have been further modernized with the addition of the High Performance neck, which matches a Modified Low Oval profile with the High Performance Taper to the fingerboard that measures 1-3/4” at the nut and 2-1/8” at the 12th fret. They also have solid ebony fingerboards and bridges, a welcome replacement for the non-wood Richlite material that has been used on previous 16 Series instruments.

The fretboard position markers retain the mother-of-pearl dot pattern of the Standard D-28, while the plain white binding from the 16RGT models has been replaced by the Antique White binding used in the today’s Standard Series, with a tint similar to the binding on vintage Martins from the 1950s and ‘60s.

Also for Summer NAMM are the D-16E Burst and OMC-16E Burst, made with ovangkol used for the back, sides, and top. And that top also gets the Mahogany Burst shading similar to the Style 15 Streetmaster models, but with attractive faux tortoise binding that gives these new ovangkol Martins a distinctive look.

All the new 16s join the long-lived mahogany 16s, and the surviving members of the “Americana Series” 16s released over the past two years with similar construction specifications, but made with silver binding, orange and black purfling, and American tonewoods that include an OMC made with cherry back and sides, and a dreadnought made with sycamore back and sides and the same body depth of the OM.

List Prices Between $2,199 and 2,399

Martin Guitar Limited Editions Summer NAMM

The seventh 16 is the special edition D-16E Brexit model, a 14-fret dreadnought “art guitar” made with satin-finished sycamore back and sides, silvery binding, diamond fret markers, and a Sitka spruce gloss top printed with custom Brexit-themed artwork by Robert F. Goetzl, and likewise fitted with Fishman Matrix VT Enhance electronics.

List Price: $2,799

One-Hundred Twenty-Five Black Walnuts to Go

Another limited edition, 125 000E Black Walnut Ambertone acoustic-electric guitars will be made. The short-scale version of the High Performance neck, scalloped 5/16” top braces under the solid Sitka spruce top, and Black Walnut back and sides should all add up to a guitar with easy playability and voice of defined top notes, colorful undertone and ample overtones. The Fishman Matrix VT Enhance has discrete controls inside the sound hole.

List Price: $2,399

Seven of a Kind

A Guatemalan rosewood/Engelmann Spruce limited edition that will have a rich, complex tone to be sure, even under all that hardware, the American Chopper Custom came to be thanks to the American Chopper TV show, which collaborated with Martin to design this special guitar, connected to a two-episode program where Paul Jr. Designs created an unusual three-wheeler. It has motorcycle-themed inlays of copper and wood, and even actual aluminum rivets. Quite a collaboration indeed, between master designers and the master craftspeople capable of pulling it off.

Is there any wonder they are making only seven instruments for this very limited edition?

List Price: $39,999

An Angler’s Angle

A limited edition of 100 guitars, the 00L Fly Fishing model has glossy goncolo alves for the back and sides, an attractive wood from South America that often resembles Hawaiian koa. It was also a tonewood used at C. F. Martin & Co. as early as the 1840s.

The top is Sitka spruce, with a special sunburst finish decorated with custom imagery by artist William Mathews. The fly fishing theme continues in the pearl inlays gracing the ebony fingerboard and headstock face plate.

I expect this 00L sound to fall somewhere between the CEO-7, which introduced the 14-fret slope-shoulder 00 body size, and the 00L-17 models. But it certainly looks unique.

Dealers may order this with on-board electronics.

List Price: $4,399

Martin Guitar L and Jr strip1 Summer NAMM

Two New Juniors

The popular Junior Series has added the 000Jr-10 and 000CJr-10E. These are smaller than normal 000s, with an even shorter neck scale (24”) but with the same sort of feminine shape to the body that many people find more comfortable than the wider, square-ish dreadnought shape. Sapele and Sitka in both cases. But the 000CJr-10E has a cutaway and Fishman electronics.

List Prices: $699 and $799

A Couple of Little Martins, Last But Not Least

The first Little Martins to get pickguards, they also get a new herringbone rosette etched into the solid Sitka spruce soundboard. The High Pressure Laminate back and sides are printed to look like rosewood and E model has a plug and play Fishman pickup.

List Prices: $499 and $599

Many More Summer NAMM Martin Photos Coming SOON!

Martin 000E Black Walnut Ambertone Summer NAMM glam cut

Martin 000-28 Modern Deluxe Review




The Upscale, Short-scale Martin 000-28 Modern Deluxe

Fundamentally Easy on the Ears, and the Hands

Specs include: All solid wood construction; Indian rosewood back and sides; torrefied Sitka spruce top with scalloped, 1/4″ torrefied Adirondack spruce bracing attached with natural protein glue, carbon fiber/torrefied Adirondack spruce bridge plate; short-scale Genuine South American mahogany neck with Vintage Deluxe profile, satin finish, two-way adjustable titanium support rod, hand-fitted dovetail neck joint and solid mahogany neck block; ebony fretboard with High Performance Taper, 1-3/4” width at nut, 2-1/8” at 12th fret, abalone Diamonds and Squares position markers, EVO Gold frets, solid bone nut; ebony bridge with Liquidmetal® bridge pins, compensated solid bone saddle and 2-5/32” string spacing; European flamed maple binding; bold herringbone purfling; high gloss nitrocellulose lacquer finish; high gloss Indian rosewood headstock faceplate with abalone script logo and golden Waverly open back tuners with butter bean knobs.

“Played lightly, and the 000-28 Modern Deluxe lights up like a Christmas tree, with a three-dimensional aura that is dominated by solid individual notes of fundamental color and remarkable sustain, with a lot of open inner-space behind them. Play the strings with vigor, and the notes bark and bite, blinking on and off, spanky and bluesy up top and with a quick reflection in the undertone that is dry and woody. It is a more open and airy voice than any rosewood Martin from the Standard Series, which tend to be dark and dense by comparison.”

Martin 000-28 Modern Deluxe vidcap 1

Full Review with Video Here