Martin’s Simple Dovetail, Dovetail, and M&T Neck Joints

A reader inquires about Martin’s Simple Dovetail and how it compares to other neck joints

Mike from Kentucky asks

I’ve got a Martin SWOMGT and a CEO-7 on order. Specs for SWOMGT say it has “solid sustainable cherry blocks/simple dovetail neck joint”. CEO-7 specks say “mahogany blocks/dovetail neck joint”. My question: What’s the difference between a simple dovetail neck joint and a dovetail neck joint?

Thanks.

Spoon writes:

First off, congratulations! That is a very tasty instrument collection in just two guitars! Cherry has its own unique, pretty sound and the SW line of guitars has a lot to like about it.

The short answer is:  The simple dovetail neck joint is so named to evoke the image of the traditional dovetail, while actually being Martin’s latest modern neck joint designed as an improvement over their mortise and tenon neck joint, which was introduced in the mid-1990s to bring down production costs of lower-priced Martins and improve their profit margin. And it really is an improved neck joint, both in terms of stability and tone. But it is still a ways short of the tone provided by the traditional hand-carved, hand-fitted dovetail neck joint that has been used since C.F. Martin opened his business in 1833.

The long answer is of course, longer…

Technically, all three neck joints are mortise and tenon joints, consisting of a groove or slot called a mortise, which is carved into the side and neck block that sits inside the body, and a protruding tongue or extension of the neck called a tenon, which fits into the mortise. But there are significant differences between the different types of joints.

Traditional Dovetail

The traditional dovetail got its name because the shape of the mortise and tenon are in a wide V, suggesting the tail of a bird. The carving and setting of the dovetail neck joint is far and away the most time consuming part of making a Martin guitar. It is therefore the most expensive task, as it requires highly-skilled craftspeople who are paid the highest factory wages. Only the abalone inlay on the fancier Martins cost more in terms of man hours and materiel.

When done properly, as they do at Martin, a guitar with a dovetail neck joint can be strung up in perfect pitch, without any glue in the joint. The glue is there to make sure it stays at the proper angle.

The down side of the dovetail is, any adjustments made to the neck beyond what the truss rod affords, require an expensive neck reset, where the dovetail neck joint is reshaped and refitted. If one hasn’t a warranty on their guitar, they would be lucky to find a repairman who charges less than $600 for this service, and the wait time is measured in weeks – or months if you want it done at the factory. Non-dovetail neck joints can often be reset in less than an hour, at significantly less cost.

The upside of the traditional dovetail neck joint is heard in the voice of the guitar. The wide V mortise and large tenon provide ample connection and mass for the transference of energy between the neck and the body. Dovetail neck guitars like traditional Martins have greater resonance than those made with non-dovetail necks, or at least it is a different kind of resonance. It has more waver and wide-ranging presence in the undertone and overtones, and most important to my ear, fundamental notes of greater “violin-like purity.” This is most noticeable in the treble strings. While some guitar makers manage to get that level of purity in a non-dovetail guitar design, Martin’s M&T isn’t one of them.

Mortise and Tenon

The M&T neck joint is based on a design originally developed in the 1970s by luthier Michael Gurian, which has a slender non-V shape to the mortise and tenon. The Martin version consists of a neck block of laminated wood, which has a rectangular shape for the mortise and tenon, and it is held in place with the help of a bolt. Martin always said the bolt was there simply until the glue dried, but they do not remove it. It requires less time and less skill, but also requires two extra braces, known at Martin as A-frame bracing, which help stabilize the fingerboard extension and neck. All non-dovetail Martins have A-frame bracing of one type or another, with names like “Hybrid” and “1-Style”, etc. Basically the M&T was a way of keeping with a wooden neck joint, and not going to a true bolt-on neck, like those used by Taylor, Bourgeois, Collings and several other modern manufacturers.

The M&T Martins with their laminated neck block proved to be more difficult to reset than other non-dovetail guitars. One famous New York City repairman was laboring over a D-16 when he referred to Martin’s M&T as “Not a true bolt-on, not a true mortise and tenon, but the worst of both.”

When it comes to tone production, the M&T Martins still sound more like Martins than they do Taylors or Huss and Daltons. After all, they ARE Martins. But they do not sound exactly the same as dovetail Martins.

M&T Martins provide a great deal of volume and vibrancy, which is one reason people who like the sound of bolt-on neck guitars often prefer the Martins made with the M&T. But they have a detectable raspy quality to the wound strings, and an edge of brashness or distortion out on the highest edge of the trebles, although this is really only heard when playing the guitar with a very heavy attack. Played lightly and they sound very pretty. And those guitars made with mahogany tops seem to filter out the worst of the M&T harshness, like the 15 Series, which offer a LOT of guitar for the money.

In any case, I am talking about rather subtle stuff, not huge differences. Still, when a player forks out the extra dough required to get a Martin made with all solid woods and a traditional, hand-fitted dovetail neck joint, they are getting their money’s worth.

The M&T Martins also have less in the way of an undertone cushion, so the fundamental notes stand up and out, overtop of the resonance underneath them, and both the top notes and resonance do not shift or quiver nearly as much as heard in a dovetail Martin. This is why some guitarists feel the bolt-on necks are superior; the fundamental notes stay straight, ring clear and do not waver into each other’s air space, as it were. The dovetail neck notes quaver all over the place and the top notes go a little bit sharp or flat while resonating. But that “imperfect” wavering in the voice is also why some people prefer the sound of traditional Martins, like me for instance. There is a certain richness to that dovetail sound I do not hear elsewhere, and the little imperfections in the warble make each guitar that much more unique. Other guitars with the traditional dovetail include those made by Santa Cruz, Gibson, and many small-shop luthiers.

Also, with a traditional dovetail, that undertone intrudes more into the top voice of the fundamental notes off the strings, so they marry, more or less, with an undertone that swells up to cushion or surround the top notes, depending on the type of spruce, the species of tonewood used for the back and sides, and the type of bracing.

For example, Indian rosewood with an Italian spruce top and scalloped forward shifted braces is going to provide a more-obvious example of that undertone swell glowing up and around the top notes than Adirondack spruce backed by maple. To my ear you get even more of that sort of thing from a Santa Cruz than a Martin. And not that this does not happen with non-dovetail guitars. It just does not happen as much, and in the case of something like a Collings it happens virtually not at all, as the fundamentals stay very straight and pure and stand apart from each other, and from the resonating glow below them.

One notable aspect in favor of the M&T neck joint is found in the fact they tend to work very well with electric amplification. That extra presence and somewhat erratic wavering in the undertone and sustaining fundamentals of traditional Martins makes them prone to feedback when amplified through microphones or on-board pickups. The M&T Martins, with their straightaway top notes and more reserved undertone do not overload frequencies in the same manner and require less in the way of EQ, notch filtering, etc. It allows for a more plug-and-play experience on stage.

Simple Dovetail

The simple dovetail is Martin’s official term for the improved M&T style neck. Basically it too is considerably narrower than the dovetail, but it does splay out more toward a V shape when you look at the mortise and tenon, which provides more contact surface. And when looking at the joint from above, when it is in place but the fingerboard is removed, it looks like a bow tie, made up of two small dovetails, one with the flat edge near the body, the other near the neck, and their points touching at the center. This insures a more secure connection with the neck block. And to my ears it has proven to provide superior transference of resonant energy compared to the M&T neck. There is just more presence and power and greater resonance in the voice.

Before assembling the guitars with the new neck joint, the simple dovetail is refined by a new robot at Martin which is pretty cool to watch, as it uses lasers to measure the minutest differences in the shape of the slot and the tongue, and then it cuts them so each guitar has a neck and block that are perfectly fitted for one another. While it is not made by a carpenter patiently using hand tools to coax a dovetail neck joint into perfect alignment, it is a lot faster, which allows for a lower priced guitar, and the simple dovetail provides a noticeable improvement in the subtle tonal properties, when compared to the M&T neck joint.

None of this is to say the M&T Martins are “bad guitars.” To anyone who has played the OMJM John Mayer model, or the D-16 Large Sound Hole model from the M&T era, it is clear they are still professional level guitars. But now that both of these models are being made with the simple dovetail, I will venture to suggest they sound even better.

The bottom line is, overall the guitars made with the simple dovetail sound noticeably better than the M&T.

And that is one man’s word on Martin’s Simple Dovetail, Traditional Dovetail, and M&T neck joints

Find more Reader’s Questions in Spoon’s Mailbag

41 thoughts on “Martin’s Simple Dovetail, Dovetail, and M&T Neck Joints

  1. I own the Martin D28 I use for strumming and Martin 0-18 I use for fingerstyle. I own a Alhambra D-SR steel string guitar which has the Spanish Heel Construction. My friend owns a D45 and the Gibson Hummingbird and he (47 years experience and a professional musician) says the Alhambra with the Spanish Heel Construction has a Superior quality sound than his D45 and Gibson.

  2. I’m 70, started playing six years ago with a Yamaha FG730 (if I remember). Then picked up a used Taylor 214CE. As I’m so enjoying learning, playing and getting better, I find that I want another guitar. I don’t know how much better a nicer guitar adds to ones ability, I hear that it does help you improve. Anyway as I think I’d like to own a Martin. But trying to discern where to start is so confusing. Different woods, necks, neck shapes, Having never played enough to understand the differences. My price point seems to be below $2k, so that would mean a used one also. But trying to understand the differences is overwhelming. I realize obviously I have touch and play several, but it’s daunting to think I have the ear or experience to know when I found the right one. I think I understand the difference you talk about between Taylor sound and others with the ringing notes. I’ve been looking at the Taylor 314, 324 series.
    And now I’m understanding the different neck joints of the Martins. So as you may guess from my rambling, it gets overwhelming
    Anyway thanks for your site. It’s a good place to learn from

    1. Thank you, RV! I am glad to be of help. There is no doubt you can move up in quality when buying a used Martin around the $2K range, especially with the price leap that happened over the COVID-19 Lock Down year. Just be sure to kick the tires and check what is under the hood and the trunk, to make sure you are not in for any surprises.

      While no two guitars will sound exactly the same, Martins are very consistent. So, even though one might have a little more bass or another might have a little more definition in the harmonics, it is almost always a matter of wishing one could take them both home. I am sure you will find one that will greatly increase your playing satisfaction.

  3. I have The OMJM signature model with the Engelmann spruce top This thing is going on 15 years old now and WOW that very special Engelmann spruce As mature and opened up to an Angelic Tone Monster W/Harmonics & Sustain. When talking with Martin guitars a lot of engineering and thought went into the Creation of that guitar everything for a purpose It has more than paid off Extremely Popular. OMJM owners are not selling these in fact I sold by HD28 just wasn’t getting any play time I am a working musician this guitar has held up well I am proven its worth compliments constantly over the tone

  4. I have a Martin 000-MMV which has a simple dovetail neck joint. I am using a small diaphragm condenser mic to amplify it. I am thinking of upgrading to a OM-28. Will I have issues with feed back with the better dovetail neck on the OM28? If so is there a better mic placement method with the OM-28. Thanks for your help.

    1. The OM-28 will be much resonant and the resonance will be much more complex. I would say it has greater potential for feeding back. But I often play such guitars through condenser microphones, like the Neumann MK184. It is just a matter of finding the best positioning. Having an amp with a notch filter is also helpful.

      1. I heard (2020) that Martin stopped using the Mortise and Tenon neck joint a few years back. Any idea if that is true?

        1. Martins M&T neck joint was replaced by the Simple Dovetail neck joint on lower-priced Martins made in Nazareth. The M&T joint is still used on the X-Series and and Road Series guitars made in Mexico, and other similar models not officially in the X Series and Road Series.

        2. I wish every thread I’ve looked at read like this one.i have a martin dc1e that I love and the neck joint is pulling away .even though Martin authorized will fix it , these folks are far enough from me to consider fixing it myself.so now I’m studying neck joints ..and I derived a lot of information from your article.ty

  5. I have a rosewood 00016 (2001) set up with an Aura system. It sounds great plugged in, but is sorely lacking acoustically (maybe partly because of the M&T joint?) So last year I picked up a 2008 OMC Aura. There is a really huge difference in volume and tone between these two guitars which, other than the glitz and glitter and the neck joint (Simple dovetail), are virtually identical. The Aura is a really great guitar for gigging. And used ones are cheap, often in $1,500 range including the $600 worth of electronics that comes inside. Also, I have small hands and the modified oval neck shape, which is basically an electric guitar neck, allows me to much more comfortably play on a 1 3/4″ neck (which I prefer). Anyways, a couple of nights ago I was set up on stage, sat down to play, and my Aura was oddly out of tune, and I couldn’t really get it into tune… hmmm. Then I notice that the heel has lifted off the guitar by what seemed like a quarter inch! Yikes! Shocking really. So, here I am on stage with a roomful of people and the neck of my guitar being held on by nothing by the fingerboard extension (which luckily didn’t snap off…). I pulled back on the headstock and snapped the neck back into place and played the show! It more or less stayed put all night. You hear stories about people who have their dislocated shoulder snapped back in and go back to work…it was like that! So the next day I ran down to my local luthier (two hours away) and he simply tightened the bolt! Really? No glue? It’s perfect, in fact I had to increase the neck relief with the truss rod because the action was lowered so much, suggesting it’s been loose for a while. Anyway, that’s my story. My question is… Does Martin put any glue at all in their Simple dovetail, cause it doesn’t seem like it?

    1. That is a good question I have never asked.

      I have watched the robot cut them, but I have not seen anyone join them. I do know that once in a while a simple dovetail will not be perfect, and the humans who carve the traditional dovetails end up tweaking them as part of their daily quotas of neck sets.

  6. Reviewing Martin spec sheets has become a passion this weekend. Many new offerings by the Legend of 1833 seem very interesting in the summer of 2017. Presently, hand crafted offerings of notable rivals are amazing, if pricey. Materials, weight, style, construction, tradition, policy, perspective… Thank you.

    Perhaps a custom shop instrument that’s not an Authentic, has a simple dovetail or a dovetail, a small bridge (or a belly) scalloped braces will be suitable? Maybe not?

    1. Thank you Joseph.

      The Custom Shop does offer the CS Series, which are not inexpensive, but are not Authentic Series expensive either. And a majority of Martin dealers do order their own limited edition Custom Shop models, with all varieties of specs.

      I suggest those interested in such things to go look at the websites of those sorts of dealers, which include but are not limited to Cotton Music, Gruhn Guitars, Gryphon Stringed Instruments, My Favorite Guitars, and Wilcutt Guitars. Links to all of them and others can be found under the About menu. Or by going here About Our Relationship with Guitar Sellers

      1. Wood also has a mind and personality of its own. And a vote in how a guitar will age and require maintenance. It can suck up glue, or reject it (relatively speaking). And how it dries, humidifies, and ages relative to other parts of the guitar (also an issue) IMO. Again, wood is the “X” factor in guitar construction, upkeep, and endurance. Finely crafted instruments (thank you Martin) will minimize these effects. But not eliminate them.

        1. Good points, Pete. This is why Martin will not accept sets of wood from private individuals to build custom guitars. They want to have as much control over the wood as possible and of course invest enormous time and energy in the processing and seasoning of their most precious natural resource. But every piece of wood on every guitar is its own thing. Wood coming sliced from the exact same log and seasoned the exact same way will be by and large the same. But not entirely. Organic materials will always be that way.

    1. Obviously, you must mean that YOU cannot hear any difference.

      Otherwise, any myth being perpetuated here is done so by you.

      When someone says a major even minor structural difference in an acoustic guitar does not affect tone, I ask how could it not?

  7. So in your opinion,t one wise:
    Traditional dovetail; simple dovetail; M&T.

    Personally I also like traditional dovetail. I respect the craftsmanship on that build, and tend to believe they sound better (haven’t compared other joint myself side by side).

    1. Yes, that is my opinion. I understand that some people prefer the sound of guitars made with bolt-on necks, which typically have very precise notes that sustain in a strong and unwavering manner, without much of the sympathetic undertone swelling up and invading that fundamental zone.

      But the M&T was not a true bolt-on neck joint and not really at true mortise and tenon joint, since it required additional support to hold the neck in place. And while they do not sound “bad,” they do not sound the same as a traditional dovetail.

      The simple dovetail sounds more like the traditional dovetail than the M&T, but the voice is still not as thick and the harmonic overtones and sympathetic undertone does not intermarry with the fundamental to the same degree, even if it is more than you got from the M&T. I think the simple dovetail guitars sound VERY good and by and large are a good value.

      1. Thanks for your straight answer! Couldn’t agree more. So what about the bolt on neck like taylor? Is it rank above/below simple dovetail in your opinion?

        1. I very much have an ear geared for the traditional dovetail sound, with its drifting sustained resonance and thicker undertone, which is are among the hallmarks of the traditional Martin sound and Gibson sound, as well as the even thicker undertone sound of Santa Cruz guitars.

          But I know that many people prefer the sound of non-dovetail guitars, which have hallmarks of very straight as an arrow notes with considerable initial sustain, that do not waver far from that centered pitch, and which reside in their own fundamental strata, distinct from one note to the next and also from the resonating sympathetic undertone. or the high harmonic overtones. Many of the finer bolt-on neck guitars that have notes of great purity and clarity, which add up to a finely engineered voice. In fact, almost all of the most expensive boutique luthiers fit into that style of building. As does Martin-inspired builders like Bourgeois, along with Huss & Dalton.

          And lovers of such guitars can find the traditional dovetail guitars rather imperfect in the way the sustaining tones waver sharp or flat and back again, and how the intonation gets a bit funky up the neck, or simply find the thicker presence and the way the undertone, fundamental, and overtones sound “muddy.” But many of those natural anomalies are what I love about the warm Martin-esque sound.

          When it comes to alternatives, I have always wanted a Taylor Leo Kottke 12-string, which I would keep in its indented C# tuning. And I may get one yet, but I would like best that it be from the earliest production years.

  8. pictures of the three would have helped ME understand the differences and similarities. i did understand the structural discussion, not so sure about the “sound descriptions” but pictures would have been nice.

    1. Good point, Tony. I will see what I can do.

      I know there are photos of the M&T and Dovetail. They would not allow me to video the robot that makes the Simple Dovetail. I do not remember if they allowed me to take any photos.

  9. I guess I’ll have to pony-up for the extended lifetime warranty if I find myself able to afford a new Dovetail dread. I traded into a Martin D 16 GT, which I found to be heavy and dull sounding compared to some friend’s Martins I had been playing. I was disappointed with that guitar , but found eager buyers for it on Craigslist, so off it went to a new home. I have tried various lower priced Martins in the meantime, but have kept none. My Blueridge BG 140 (I preferred the Mahogany’s sound over the Rosewood) is my take-along picker’s circle guitar for now, but a new dovetail Marting is on my bucket list.

  10. I own 4 martins, HD35,Veterans Model, D15M, D17M Sunburst, All Are great, The 35 is better in sound than the rest but i like all 4!!! all martins have their own sound,every one is different, just like people are!!!!!

    1. Hi! I myself live in northern Sweden (which is not in the “optimal” climate zone for acoustic instruments anyway, but I´m OK so far) and have – since 2007 – bought 3 American guitars; two Martins (D-16 sapele and 000-28EC) and a Taylor (712ce-n) that each represents the three described neck joint types in the article. The “Clapton” is dovetail and 7 years old, The D-16 is M/T neck (8 years) and The Taylor (2,5 years) is bolted (I suppose).

      Among the two Martins, the D-16 is so far the most stable in tuning and intonation (maybe I just got lucky 😉 and “is built like a tank” and also has the most accentuated overtone spectrum (much more evident than the rosewood ”Clapton”). A great strumming guitar that is – the gloss sapele back and sides gives it a “Taylorescue” bright sparkling dimension, which is not bad at all for a Martin. And it´s not getting “boomy” which in my opinion is a very good thing. (Unfortunately the model is discontinued).

      The “Clapton” is more of a “wild”, ever changing living creature, even after seven years it changes alot in tone, string height, string tension and need for tuning with temperature and air moisture values. Supposedly it´s more due to the soundboard than the dovetail joint.

      The newest in line, the “bolt-on” Taylor 712ce-n has a problem with intonation in the upper scale area that is not “built-in” but is due to variations in temperature and moisture. That probably has more to do with the different wood parts “getting to know each other” than the bolt on neck I suppose. But It´s slowly getting better with age so the tuning/intonation problem decreases steadily– but you should not have to wait 3-4 years or so for an expensive massive wood guitar to stabilize before it gets playable, don’t you think?

      All in all….In tone they are all very different and that becomes dimension becomes more clear with every passing year. I value their tonal differences alike, no one is better than the other and only make my “acoustic world” richer.

  11. There was a day I wouldn’t own anything that didn’t have a dovetail construction. But I’ve been demoing a lot of Bourgeois guitars lately and I’m starting to form the opinion that Martin is wasting production time (and adding unnecessary production cost) with the dovetail design.

    1. Fortunately Martin knows enough not to do any such thing. Bourgeois makes some of my favorite non-dovetail guitars, but there is no mistaking them or other bolt-on neck guitars like Taylor or Huss and Dalton for a dovetail guitars as those made at Martin, Santa Cruz.

      Regardless of the kind of neck joint used, it contributes to what the guitar ultimately sounds like. A Martin made with an M&T neck joint sounds different from a Martin made with a dovetail, and a Bourgeois with a dovetail would not sound the same as the Bourgeois made with their usual bolt-on neck.

      1. The tonal difference you’re hearing is likely to be from the difference in bracing rather than neck joint.

        1. Except that there is no difference in bracing between the some of the M&T Martins and the Standard Series guitars, except for the extra two braces required to help stabilize the M&T and now Simple Dovetail neck joints.

          And the same tonal difference exists in all Martins not made with the traditional dovetail neck joint, regardless of what bracing pattern they use, and is never present in Martins made with the traditional dovetail.

          If there were no tonal difference between the traditional dovetail and the modern neck joints, Chris Martin would have put the M&T on the D-45 decades ago.

        1. Oooo I would like to see that. Of all the bolt-on neck guitars out there, I tend to like his best. The only dovetail guitars of his I have seen were the Martin-Schoenberg Soloists.

          1. 🙂

            Very nice indeed.

            Mine is on the 1989 page – the pearly OM with waterfall bearclaw. I sold it to Chris Martin for his private collection (C. F. Martin IV, not the rock star.)

    1. Would I say it is better? Yes. No question about it, when it comes to the part the neck joint plays in how a guitar sounds.

      It is possible the simple dovetail might be considered better when it comes to being easier and faster to reset as the guitar ages and all that.

      But Martin’s M & T neck, and the simple dovetail neck that has replaced it on many models, were invented for one reason only, to cut production costs and increase profit margins. Representatives from the company quoted from the company line for years, when they said there was no tonal difference between the new neck joint and the old. But that simply isn’t true.

      That being said, Martins made with the new neck joint are still very good guitars and I do feel the simple dovetail improved the tone over the M & T. And I am sure there are people who actually prefer them to traditional Martins, just like many people prefer Huss and Dalton, Collings, Bourgeois, and Taylor guitars to traditional Martins. And all of those guitars are not made with a traditional dovetail neck.

  12. Thank you for this eminently informative artcle.
    It was exactly what I was looking for while considering the purchase of my next Martin guitar.

    1. Thank you Robert. Your comment gave me a reason to re-read the article. I realized I had somehow lost a paragraph, referring to the way the undertone and top voice of a traditional dovetail guitar tend to marry more than other types of guitars.

We and our readers would very much like to hear what YOU think.

This site uses Akismet to reduce spam. Learn how your comment data is processed.